Struggling with broderie perse

I am struggling with this new-to-me technique, broderie perse.

applique 1I understand the concept, and I did a bit of online research to see exactly how it’s done.  However, I wasn’t able to find a lot of specific how-to information out there.  It was mostly historical information; it seems that broderie perse has fallen out of vogue.  A post on Barbara Brackman’s blog states that quilters would not cut very close to the actual outline of the shapes, but rather loosely in the background around the shapes.

Well.  That’s not going to work so well with my chosen appliques.  The background, seen here in my previous post, is more of a bluish periwinkle.  That won’t work with the black background of the quilt.

So I decided to try invisible thread; Superior’s MonoPoly in Smoke.  It really is very, very hard to see – so much so that I had to get a magnifying glass to thread my machine.

applique 2But I don’t like the little holes the needle leaves in the applique. I used a size 10 needle, which is the smallest needle I have.  But it was still leaving those ugly holes, and since the appliques are fused, I doubt the holes will close back up after washing or steaming.

applique 3So I switched to Bottom Line, which is a fine (60 wt) thread.  Didn’t care much for that look, either.

Back to brainstorming.  I briefly considered a denser zigzag, but that’s a TON of work, going around all those shapes, and I think in the end, it will detract from and obscure the appliques.

I’m actually considering pulling off all the flowers and doing a different type of applique for the borders, but the perfectionist in me is mentally stamping her foot and pouting because these flowers are so stinkin perfect for the quilt!

So.  Does anybody out there have any ideas, suggestions, or broderie perse resources I could check out?  I would greatly appreciate it!

peg large sig